From the brand
Why Us
YYR has been supplying various storage racks to many large supermarkets for more than 20 years. Strict quality control and high cost performance are the reasons why we remain standing.
Choose YYR & make things better!
YYR Power Tool Organizers
YYR Lumber Storage Rack
YYR Garage Hanger Hooks
YYR Garage Organization
Professional wall storage rack supplier.
【PROFESSIONAL TOOL STORAGE SOLUTION】: YYR tool organizer take advantage of wasted wall space and keep all of your power & hand tools in one central location so you can easily find them and never waste time searching for them again!
【EQUIPPED WITH SURGE PROTECTION POWER STRIP】: You can charge all your power tools directly on the tool shelf without needing to look for an outlet. Output: 125V/15A/1875W, 6Ft 14AWG power cord included.
【HIGHER AND WIDER】: This tool hanger is taller and wider than the ordinary version. The height of the middle shelf is 7.5”, which is enough to place the charger. Drill rack’s 1.7″ wide slot and 2.2″ slot spacing fit most power tools.
【HEAVY DUTY & DURABLE】：Our tool rack is made of industrial-grade steel and equipped with high-quality mounting screws, with a total load-bearing capacity of up to 300LBS. The durable black powder coating prevents rusting and lasts a lifetime.
【EASY TO INSTALL】: The installation process of our garage shelving is easy, we just need to connect the gauge steel wire and plating with screws and hang it on the wall. We offer professional manuals and professional installation accessories. You only need a few minutes to assemble a perfect tools organizing unit for garage wall.
badger –
Excellent rack, Excellent value!
This is an excellent value and organizational storage for your tools. I opted not to use the screwdriver holder and am currently using the other hand tool platform to hold the charger. Eventually, i might relegate some of the larger tools to the bags/case below b/c my shop is a little crowded (you can see the drill press is stuck in that corner as well and the paper dispenser in the middle…) The battery tools hang very well on the hooks. there is enough room to leave the batteries in them, but i don’t. the shelf is sturdy enough for what i have on it and more if I wanted. the assembly was fairly uneventful. the instructions adequate–could be a bit better, but adequate. the nice thing is you can snake your apex bit driver through the screw holes on the adjacent shelves to tighten the screws directly in-line. the screws themselves didn’t ‘start’ easily, but stay after them–they work fine…just a bit persnickety. the mounting holes line up perfectly with studs (32″ on center); however, my studs were off so i had to use inserts. on that note, do not even try to use the inserts they provide–total crap…but most inserts of that nature are. use the spin in variety. i added a pic of the brand i find most effective–there are others, but this was the first on the market and generally i find they work the best of them all. If you blew off my recommendations and tried to use the provided inserts–shame on you–but, take that one out–or push it through into the wall–then, cut off the end of the ‘E-Z Anchor’ before you screw it into the huge hole you have now created in the wall. This modification will change the insert so the screw won’t have anything to ‘force open’. these are designed to spin into the wall without pre-drilled holes. when you have an existing hole, the anchor will not have enough friction to hold against the screw so you will spin it out and just create a larger hole! Okay, back to the rack. this works really well for storage. the tools slip in/out easily–to the point i have no problem accessing them around the drill press. it is lightweight but sturdy and well built. you can’t go wrong with this –especially for the price. a great value for sure.
Jason D. Neel –
Perfect space saver!!
This was so easy to assemble once I actually read the directions haha. It is very sturdy, does a great job of holding even more tool than I own. It looks professional and is a huge organizational part to my garage. For the price it did a lot more than I expected it would, the small tool holders on the sides were a good added touch
Shirley Torres –
Heavy duty power tool organizer
Great,hold alotof items, easy to installed heavy duty Great to organize garage tools worth the money
Stacey Reynolds –
Great Quality!
Love it! It holds everything I need it to. It’s also sturdy. Was a annoying to put together and one of the shelves was a bit bent but not enough to make a difference.
Dalana –
Really good gift
Bought this for my husband and he loves it. It’s made well and is very efficient. Highly recommend If you have plenty of tools that need to be organized. It was also very easy to set up
Ron Pearman –
Space saver
One of the best things I have in my garage. Freed up cabinet space, put all my tools in one location with battery chargers too. Very handy and easy to install.
CA –
Great power tool organizer.
Well built and sturdy. The pictorial assembly directions are too basic, for example the hinged shelves, nowhere does it say that the bolts on the hinge (left loose so it can fold for shipping), can be tightened down to lock the 2 shelf halves rigidly (and level) in place. Being a former mechanic, I was able to realize it needed to be done, other than that, the assembly was relatively easy, if you have short Philips screw driver (comment below).And speaking of shipping, this puppy was well packaged in the box it came in, no dents, dings or missing paint.Assembly tip… you’re going to need a stubby Philips screwdriver to be able to get to the middle shelf screws, a longer screw driver can’t fit in the opening between the middle and the bottom shelf brackets of the side supports, if you try to angle a longer screwdriver to get to the screw heads, it will be skewed (at an angle), a recipe for a stripped Philips screw heads. I had no problems with the tapped screw holes stripping the screw threads, as other have mentioned occurring in their reviews.Would I recommend this organize to others? Yes!!
Herb A. –
Fits my needs
Works great for me.
Michael –
This tool organizer is excellent. It’s made of sturdy, coated metal and is very easy to assemble. All the hardware needed for assembly and wall mounting is included. The mounting holes are spaced 16 inches apart, so you can secure it to two studs for better support. It keeps my tools organized and out of the way, and the middle shelf has plenty of room for batteries and chargers. I’m very happy with this purchase.
Peter K. –
With paying for one of the most expensive racks on Amazon I was expecting quality. The middle rack would not sit down level at the hinge and the hammer rack was useless at holding hammers. I took both the hammer and screw driver racks off and threw them into the bin. For the middle rack I screwed a piece of angle to the wall at the point where it pushed the rack into the correct shape. Worst buy I have made in a very long time.
MikeM –
Great product, great after sales support, definitely one to be recommend
Karen –
EXCELLENT!!! Well made, sturdy, easy to assemble & attach. Clears up counter space, tools well organised.
Jayne Varnam –
Easy to mount, holds lots of tools.