Product description
Durable twisted wire for increased cleaning function
Stainless Steel Handle
Protrusions for effective protection of cleaned items
Package contains: you will get 6 pieces stainless steel bore brushes with handle, enough quantity and various sizes can meet your different needs, and suitable replacement for traditional hand wire brushes
Practical design: the wire cleaning brush is designed for easy access into narrow holes and confined areas, can be applied for ports, tubes, bearings, cylinders or other narrow clean up requirements
Easy to use: you just need paste one of the brushes on the included handle to bore out rust or dirt, and it can also use on any power drill or die grinder, which can provide you with effective cleaning
Multi specifications: there are 6 different sizes of twisted wire stainless steel bore brushes, including 8 mm, 10 mm, 12 mm, 15 mm, 17 mm and 19 mm indiameter; Each brush has 4 inch in length and 1/4 inch hex shank to be mounted on any power drill or die grinder (not included)
Warm note: please do not exceed 600 rpm, and do not turn counterclockwise, just for push and pull motion only; Pay attention to the correct use of these brushes, in order to prolong the service life
Lisa J –
Nice Brush Kit for Variety of Sized Holes
Replaced brake pads and needed to remove several different sized bolts. The variety in bore brush sizes made cleaning the rust/dust convenient and fast. After one brake pad replacement on one axle, one bore brush began to look worn after quite a bit of use, but given the affordable price, no big deal 🙂
A-A-Ron –
Good, reliable and perfectly priced for automotive work
Durable and useful little drill/impact driver attachments. I’ve been using them to clean out the rust from caliper brackets and they work great! As with all high speed tools wear protective eye equipment and gloves because the bristles can and will fly off at crazy speed and get stuck in your skin. A safe enclosure is recommended or a magnet roller to pick up any bristles works to avoid stepping on them later. While some other people complained about these snapping I have used the same one about 50x over and it only snapped because I tried to bend it while using it to get a corner space. If you keep a steady and straight hand, you won’t have issues; these are also designed to be disposable as well so I see no issues with this. Cheap price, decently built and serving me well to clean off tough rust. If you buy these I recommend a 1/4″ exenteder if you’re trying to reach deep pockets of car parts or anything really. Simple to use as any drill bit.
Ray –
Gets the job done, could be better quality
Works well to clear rust, but it is not the most durable product. The brush came out of the adapter on the first use for one of the pieces, and another piece’s bristles were pretty beat after a single use
Billy –
Pretty good
Only used them once so far but seem to work fine. Able to get into smaller areas
TheMann –
Hasn’t lasted long
The wire is very flimsy, and after 1-2 uses the wire is basically gone. I think next time I’ll spend a little more money on something of better quality.
JS –
Good product, good price
Ordered this kit because another product I ordered had c-clamps that had a ton of overspray inside of the threaded holes. The overspray made it nearly impossible to drive the corresponding bolts through the c-clamps. Luckily I found this kit on Amazon and it worked perfectly for me. Put the correct size bore brush on my drill, ran it through the threaded holes a few times and bingo! The bolts were now able to drive through with little to no resistance. Good product, good price and fast shipping. I think it came via one-day shipping. I’m sure there are other more expensive, name brand kits out there, but this kit is good quality for the price and should last a long while with my limited use.
Amazon Customer –
Poor quality
These are not made very well. Brand new and the bristles just fall out. Waste of money.
Asael Rodriguez Prado –
Good
Good wire brushes