SiTiSFi emergency lights providing customers with quality products and the most suitable lighting solutions.
SiTiSFi is a professional emergency wall light groups, we are focus on creat bright and safety lighting environmental. SiTiSFi factory has more than 20 years experience in light production fileds, the factory more than 500 employees. And North American is main market and also save cost for them in strict with control quality, it is clear that how to work out good designs for USA market.
Features of Waterproof Wall Pack Emergency Light
Emergency wall light has a light-sensing recognition function. When the light intensity ≤ 10Lux, the light will automatically turn on, and if the light intensity ≥ 30Lux, the light will automatically turn off.
You can also choose the switch mode and control the wall pack light on and off through the wall switch for normal lighting use.
Built-in 4.8V 1800mAh Nickel cadmium backup battery provides 90 minutes of emergency operation during a power outage, maximum 24 hours for full recharge time.
1000lm for general mode, 190lm for emergency mode. Suit for shopping malls, warehouses, courtyards, garages, corridors and so on.
The shell of the outdoor emergency wall light is made of rust-proof aluminum, which can be used in a variety of complex outdoor weather after being sealed and combined.
Verifies battery disconnection, charger failure, transformer failure at every 5 seconds. Every month one-minute and every 6 month 30 minutes battery discharging test.
IP65 Waterproof Housing to protect against dust or water intrusion, which makes the Wall LED Light well suited to illuminate indoor and outdoor.
Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.7 out of 5 stars 145 4.6 out of 5 stars 50 4.8 out of 5 stars 17 4.9 out of 5 stars 32 4.7 out of 5 stars 7 4.9 out of 5 stars 26 Price $98.99$98.99 $90.99$90.99 $130.99$130.99 $151.19$151.19 $48.99$48.99 $129.99$129.99 Input Voltage AC 120V/ 277V AC 120-347V AC 120-347V AC 120-347V AC120/277V AC 120V/ 277V Mounting Options Top, back mount Top, back, side mount Top, back mount Top, back, side mount Top, back, side mount Back or side mount Discharge Min 90 mins Min 90 mins Min 90 mins Min 90 mins Min 90 mins Min 90 mins Back-up Battery ✓ ✓ ✓ ✓ ✓ ✓ UL listed ✓ ✓ ✓ ✓ ✓ ✓ Adjustable Heads ✓ X ✓ X X ✓🌟【Photocell & Wall Switch Operation】SiTiSFi emergency light fixture built with dusk to dawn photocell sensor automatically turns ON at sundown/night and OFF at sunrise/daytime. Or can be switched through an external switch (not include). Regardless of the mode of operation, the emergency LED lights will illuminate from battery power on loss of normal AC power.
🌟【Durable Battery Backup】The led emergency lighting is approved by UL certificate and built-in high capacity Nickel cadmium backup battery provides more than 90 minutes of emergency operation during a power outage, maximum 24 hours for full recharge time. The replaceable battery used in led emergency exit light can be recharged AC 120-277V more than 600 times.
🌟【Easy Installation & Self Test Function】This emergency lights can be wall mounted, universal J-box mounting pattern and snaps into place for fast and safe electrical connection. Once AC power is supplied to emergency exit light, the unit will automatically initiate a Self-Test and Self-Diagnostic Test every month and every six months for easy monitoring of battery/charger failure.
🌟【Sturdy Material & Waterproof】 The emergency lighting is made of die-casting aluminum housing with dark bronze powder coat finish and the EVA foam on the back of the lamp can prevent water leakage and insulate heat. The exterior emergency light is suitable for outdoor and wet loctions, great for residential and commercial use, such as pool areas, parking, hallways, garages, large backyards, warehouses etc.
🌟【SiTiSFi Benefit】SiTiSFi is honored to based in the USA, providing first-class quality products at affordable prices backed by experts.We maintain the high standards for all products by testing to ensure that best performance and safety environment.
✨ H A P P Y 💖 S H O P P E R ✨ ✌😊 –
Serves as backyard emergency light
The emergency light came with instructions, screws, and wire nuts. I installed it in less than 10 minutes using a power drill. The hardest part was removing the cover. I missed removing one screw and didn’t realize it until two minutes later. The instructions included a diagram showing the screw, but I missed it.The instructions clearly explain how to switch from photo sensor to external switch operation. I drilled holes for the mounting screws and wires. The wire that supplies power to the battery was disconnected, so check it before replacing the cover.I pressed the test button and the light emitted an intense, white light that illuminated the entire backyard entrance and its surroundings. If I switch off the power, the emergency light turns on instantly as it should.I installed the emergency light on the wall outside my backyard entrance, replacing my old light fixture. I sealed it with outdoor silicone. I use it as a backup light or for extra light by pressing the test button twice or three times, which keeps it on for 5 or 30 minutes, respectively. If I press the button four times within two seconds, the light will stay on for up to an hour and a half.The all-metal body of the emergency light has not rusted in three months of use. It has also worked well during the few short power outages I have had, turning on immediately.To conclude, this emergency light works as backup light, too. I can turn it on for a long duration by pressing the test button more than twice within two seconds. This gives me peace of mind knowing that I have light near my backyard entrance at night when power is out.
Hungoverfurball –
They work as you expect
Building had several of these cheap style exit lights from about 5years ago, some worked some died so we replaced them all with these. Work great and cheap!!
Mits –
Nice signs.
There are no complaints on this product. I highly recommend them. Installation is easy and the overall results of the product is good.
Blondie in TN –
Great lights
Great lights, serve their purpose well!
john hill –
emergency exit signs
nice looking emergency exit signs
PRg –
Very practical and stylish
I like the internal options of photocell or switched provided. Beautiful high quality emergency light. Industrial quality with heavy duty case. Works very good. Priced a little too high but it is above most of emergency lights in the market that I have seen. The enclosure is solid and the color is excellent. Everything is good. You definitely need more than one of these to look good wherever installed. Recommended.
Randall Michael Tobin –
Good value but disassembly and installation problems
I’m a very resourceful handyman and was looking forward to a simple replacement of a “dangling by the wires” EXIT sign at our bakery. The product would seem to be all that was needed, being similar to the unit it was replacing.The first problem I encountered was the instructions for disassembling the unit so as to remove the mounting hardware and accessing the wires. The first step – how to remove the sign cover – shows the screwdriver pressing the bottom cover tab to unlatch it. I unlatched all 4 tabs but the cover would not come off. After 15 minutes of no success, I tried to remove the top cover (with the word EXIT). This worked immediately! Looking at the insides, there was no way the bottom cover would have come off as it’s connected to several interior framing parts that hold the battery and the circuit board.The second problem was the installation. The previous sign mount was screwed into a junction box in the ceiling. The screw holes in this new sign mount do not align with the screw holes in the junction box. The next thing to try was the metal crossbar pieces that come with this product, that should have solved the problem. However, the orientation of the screw holes in the top piece of this adapter that screws into the junction box was the same orientation as the mount for the sign, meaning there was no place for the second set of screws to go as the pieces superimposed on each other. It would have worked if I rotated the sign 90 degrees but then people wouldn’t be able to see the EXIT sign from the side. In the end, I had to use my drill to move the plastic mount holes further apart so that the mount could be screwed directly onto the junction box. This job was a real bear to complete and instead of replacing both EXIT signs in our bakery, because of the above issues, I could only got one done today. Now that I’ve figured out the first one, the second one should be easier.
Paul Delmonico –
Installed 3 today
I replaced 3 old signs in a old building with these new emergy lighted sign at the request of the insurance company and it went perfectly.