Product description
POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter
COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease
DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use
WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines; the two forcing screws also work with most VW vehicles’ power steering systems
USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation; the custom blow-molded case keeps everything well organized and easy to store or carry between jobs
Susan Arthur –
Auto tool.
Worked as it should.
Philippe –
Great tool to add in your tool collection.
I was helping a friend replace the P/S Pump on his Dodge Ram. He had borrowed the tools from an Auto store where he had purchased the replacement part.After fooling around with the tool that had bad threads and other issues, he went back and got another tool that worked properly.I decided then that I would get my own, and take care of it. This tool works well and the price is great!
Eduardo Casanova –
Excelente calidad de herramientas, muy recomendable por precio
El Orion Motor Tech juego de herramientas extractor e instalador de polea de bomba de dirección asistida me pareció de muy buena calidad desde el primer uso. Las herramientas se sienten firmes, bien fabricadas y resistentes, ideales para este tipo de trabajo.Lo utilicé para sacar e instalar la polea sin problemas, todo calzó correctamente y permitió hacer el trabajo de forma limpia y segura, sin dañar la bomba ni la polea. Se nota que es un kit bien pensado, con piezas sólidas y roscas que no se barren fácilmente.Por el precio, la relación calidad-precio es excelente, ya que evita tener que improvisar o llevar el trabajo a un taller. Es una herramienta que perfectamente puede usarse más de una vez y seguir rindiendo bien.En resumen, muy recomendable, buena calidad de materiales y excelente opción si necesitas una herramienta confiable para bombas de dirección asistida.
Socrates.62 –
Absolute garbage
Should be zero stars. Not even a worthy toy. Couldn’t pull one pulley, not even close. I’m 175lbs and used wrenches, not impacts. As soon as you started feeling resistance this wax toy starts folding in on itself. Clam shell opened up and just slipped by the pulley nut, and the alignment rod about snapped with barely any force. Don’t know what butter mobile this is made for, but it’s not for real work. Even the tooling is cheap, cast, mild steel. I-rings pre ripped, Threads are rough as hell feeling and the finish is a joke. You’d be best off putting your lips around the pulley and sucking to get it off than use this.
Candy Lover –
Gets the job done on my 5.3L Chevy v8 power steering pulley but might not next time
Gets the job done but might not next time. This fit will and worked. I saw someone else’s reviewabout using some aluminum flashing as shims and this is great advice. Definitely shim the split clamps in the outter ring evenly with two small aluminum shims. I cut mine from flashing I had on hand.The nose, the piece that pushes on the power steering pump’s shaft on my Chevy 5.3L v8, was softer steel and deformed a fair bit. I liberally applied grease to the ball bearing inside and this part. You can see this in the picture with the yellow arrow. I have acess to a lathe so I will make and harden a new piece to replace this part when I’m done fixing my truck. I’m happy this worked the one time on my 20 year old very rusty new england truck. I only picked this tool because it would come 4-8am next day and it arrived at 4:30am. Ifv you are going to use this a lot. Consider a higher quality tool.
chase allbert –
Worked great for me
I was skeptical because of the price, but I used it to remove and reinstall the power steering pump pulling on my 05 Tahoe and it did a great job. It also tells you to what size wrenches to use which is convenient
JB –
Removed and installed pulley on GM power steering pump
This is a good puller for the money. If you do this kind of work for a living you may want to buy a higher quality puller set but for the amount of pulleys I take off power steering pumps, this is all I need. I needed to take the stock pulley off a GM power steering pump and then install an aftermarket pulley. This puller does both and it does them quickly and safely. I only used one of the puller parts in this kit and it removed and installed a GM pulley. I would definately recommend this.
JimBob44 –
The price is right
It does what it is supposed to, at least once. The tool steel is lowest quality, when stressed on a stuborn shaft the tool threads are more of an obstacle than the pulley friction. The tip of the extractor screw separated under pressure, the screw thread deformed and will not go through the puller by hand. Obviously too much force for the toy but I did get the pulley off eventually. I returned it for replacement and try try again.
Michael Nikolai –
This worked like a charm pulling and removing the CIII Power Steering pump on my 06 F-150. Lightning fast shipping, great price and well built.
Geoff B. –
As described, worked perfectly and good quality. Thanks G
M Young –
If you didn’t know how to this puller, the instructions may leave you scratching your head. They are not very clear. I watched a YouTube video on how these things work so I kind of knew what to expect. That being said, I got my p/s pump pulley removed, so no complaints.
JT –
Used it on my F-350 6.4L power steering pump and it worked great! I had to put some pretty good force on it to get the pulley off the old pump and it held up just fine.
Amazon Customer –
This was a very cheap lousy tool everything on it was not up to standard it twist would not line up properly causes a lot of issues on the pulley so I get this tool a zero in rating a big fat zero because it’s no good it’s garbage please do not buy it it’s not even worth the plastic to come in thank you