Neiko 02448A For a fully complete impact socket set that includes both shallow and deep sockets in SAE and metric sizes, Neiko’s 65-piece set has you covered for whatever nuts and bolts you may encounter. This set is made with an impact-grade chrome vanadium steel with a black phosphate finish and neatly organized in a sturdy storage case. This 1/2-inch drive impact socket Master set comes with the following pieces: (58) 1/2-inch drive sockets: SAE (deep and shallow): 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1-inch, 1-1/16-inch, 1-1/8-inch, 1-1/4-inch metric (deep and shallow): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm (3) 1/2-inch drive extension bars: 3, 5, 10-inch, (1) 1/2-inch drive by 10-inch length quick-release ratchet handle 72-tooth (1) 1/2-inch drive impact Universal joint (1) 1/2 (F) to 3/8-inch (M) drive impact Reducer (1) 3/8 (F) to 1/2-inch (M) drive impact Adapter.
HIGH DURABILITY: The impact socket set 1/2 drive metric and standard is made of high impact grade components of this master kit are constructed of drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners.
6 POINT DESIGN: The 6-Point hex 1/2 impact socket set design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output.
DUAL MARKINGS: The impact socket set 1/2 drive has a highly visible laser-etched markings on the black phosphate finish makes it easy to identify drive socket sizes and measurements to allow for fast application, efficiency, and accuracy in your automotive workspace.
ORGANIZED CASE: The included impact socket set case is blow molded to fit each individual socket size and features labels for organized storage with secure lever locks to prevent opening accidentally at the job site.
SET INCLUDES: This complete shallow & deep impact socket set contains: 58 x 1/2″ Drive sockets – SAE (Deep and shallow): 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4″, metric (Deep and shallow): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm; 3 x 1/2″ Extension bars: 3, 5, 10-inch, 1 x 1/2″ By 10-inch length quick-release ratchet handle 72-tooth, 1 x 1/2″ Impact universal joint, 1 x 1/2″ (F) to 3/8″ (M) reducer, 1 x 3/8″ (F) to 1/2″ (M) Adapter.
Milwaukee Electric - M18 Fuel 1/2 HTIW 3/8 MTIW Automotive Combo K eBaydiy Tools
$619.98
Endoscope Camera with Light, 1920P HD Borescope Tools with 8 Adjustable LED Lights, Endoscope with Semi-Rigid Snake Camera, Inspection Borescope for iOS and Android - 16.4ft Single Lens eBaydiy Tools
Original price was: $35.99.$25.98Current price is: $25.98.
NEIKO 02448A 1/2″ Drive Master Impact Socket Set, 65 Piece, Standard SAE (3/8″-1-1/4″) & Metric (10-24 mm) Sizes, Deep & Shallow Kit, Includes Adapters & Ratchet Handle eBaydiy Tools
$149.91
Or 4 interest-free payments of $37 with
🚚 Free Shipping on orders over $75+
📦 Arrives: Mar 22 - Mar 24
🛡️ 2-Year Professional Warranty Included
Guaranteed Safe & Secure Checkout
Additional information
| Brand | NEIKO |
|---|---|
| Item Length | 24 Millimeters |
| Material | Chrome Vanadium Steel |
| Finish Type | Black Phosphate Finish |
| Number of Pieces | 65 |
| Drive System | Hex |
| Set Name | NEIKO 02448A |
| Drive Bit Shank Style | 1/2" Drive |
| UPC | 816914022881 |
| Global Trade Identification Number | 00816914022881 |
| Bit Compatibilities | 1/2" drive |
| Manufacturer | Neiko |
| Item Weight | 34.7 pounds |
| ASIN | B07MXB85S3 |
| Item model number | 02448A |
Chris R –
Better than Snap-On!
Don’t get ripped off by the Snap-On van. These tools are amazing and have held up to abuse. I’m writing this review over a year later after timing chains, clutches, & a head gasket. 0 Signs of wear. Best investment in your tool arsenal.
Tom B. –
Talk about HEAVY duty
Whereas some low-to-mid-range-priced products marketed as “impact sockets” clearly don’t deserve the designation, I trust these to take a real beating without issue. The weight is certainly there to tell the story, not to mention the beautiful phosphate finish with both printed and etched (and very readable!) markings.I expected the sockets to be good going in. What I did not count on was wanting to actually use the wrench it came with, but whaddya know? It’s REALLY nice! It’s not long, not slim, doesn’t have a flex head, doesn’t have a soft grip, only 72 teeth…nothing special, in other words. At the same time, it’s every bit as tough as the sockets, and the ratcheting action on it is smooth as butter. The switch is recessed – appreciated if you’ve ever used one where it wasn’t – but the release button is large and sticks out a bit – also appreciated. This wrench and extensions/adapters are a real bonus, as the price would be great for the sockets alone.The set falls short in only two places. The first, as many have previously noted, is the case. It’s certainly not the worst I’ve seen, but you’ve got 35 pounds of tool that calls for a case up to the task. This one allows sockets to rattle out of place as the top lid isn’t held tightly to the bottom half, and there’s no way the side fasteners are going to hold forever either. Why is it so hard to find a well-designed case with a socket set? The ones where sockets go in vertically hold, but then you can’t read them. I mean, they don’t even have to make the case with more expensive materials. Just design them better, holding the top down tighter so they can’t move. I will say this: At least they put everything on one side. The cases that hold tools in both halves of the case are almost always a catastrophe.The other negative is Neiko’s poor warranty, which, for most of their products, is a mere 30 days. Fair enough, I guess. You’re gonna make sure you have all your pieces and get a replacement up front if necessary. After that, these are sure to hold up well to average use for a long time. Of course, if you turn wrenches for a living, that probably won’t work for you. You use a tool frequently enough and long enough, and you’ll probably run into something or another. But if you’re a professional, you’re spending a good deal more to get a bump in quality and the top-notch warranty that comes with it.As for me, I’m just a guy in his garage making as many problems as he’s fixing. And for someone like me, these are ideal: Not the best in the world but good enough to get the job done many, many, many times down the line.
Liz –
BUY THESE!!!
Really high quality and affordable set!! My boyfriend loves these, they made for a great valentines present.
Dan Rodriguez –
Well worth the money
Surprised at the quality. Ratchets are outstanding.
DarrianAshoka –
Quality tools, Carry Case needs some work.
I have used some Neiko locking socket extensions and wobbles in the past for a spark plug job and was very very happy with their quality.This year (actually last year now), I decided to break down and finally replace my old craftsman 1/4-3/8 inch drive socket set that has miscellaneous pieces missing.After going through pricing and value of different brands I settled on these Neiko Master Socket Sets. I bought all 3. (1/4″, 3/8″, 1/2″)CASE PRO:One thing that I really liked about them besides the quality was that they organize it by size and lined up the shallow and deep sockets that are the same size. This makes it much more functional to find what I’m looking for and I thought it was a great thought out layout.CASE CON:The only downside is the fact that they are using a very cheap, lightweight, blow molded case which makes it feel cheap and likely won’t survive the job site environment that I am in as well as some competitors would.I would understand the lack of quality in that regard if it was just one of the partial socket sets and not the “Master Set.”In my mind, the people that are probably getting the master set are likely in construction or mechanics that might need to move the entire set to where they’re working and I just don’t think this is going to last structurally.If the case was more durable, this would be the perfect set!
Amazon Customer –
Ratchets are holding up well
2 years of use and this kit is still perfect.
JH –
Gift
I purchased these for my son as a gift. He is learning to be a mechanic and will hopefully take him far. I was actually kind of jealous as it looks like a really nice kit. Super heavy and difficult to wrap, but super nice lol
67 Camaro –
Good value
I have purchased numerous Neiko tools lately and the quality far surpasses what it should be for a tool in this price range. Have not had any fail and they seem to be a very sturdy tool. Functional case included.
César Cotero –
Ya lo estrene y hasta el momento trabajan bien sin contratiempo algunoYa el año 6meses usando seguido con la pistola de impacto y todos los datos y accesorios bien no barridos ni quebrados lo recomiendo
Mearsy101 –
Really good sockets I have had no issues with them, high recommended.
Jack –
Bought this set for my service truck and use them with a snap-on impact daily. Case it build strong and had been holding up great. Bounces around in my truck cabinets all day long and no issues
Angel Gomez Flores –
Tengo el de 3/8 y este de 1/2. Los dos son un buen conjunto de herramientas no conozco otra marca que se le compare con respecto a la resistencia. Son dos puntos negativos (ni tanto)el primero es que los dados de 1/2 (10, 11, 12 mm) son muy robusto (se entiende por la entrada de 1/2) para espacios pequeños. Quería vender el de 3/8 pero lo pensaré dos veces pues estos (3/8) dados son más compactos para espacios más pequeños.El segundo es que este paquete (1/2) no trae lo dados de 8 y 9mm. No son los más usados pero no los más abandonados.En general todo excelente si tienes el de 3/8 querrás el de (1/2).
Fahad S. Alghamdi –
اعجبني التنوع في المقاسات والجودة وسنطة الحفظ والسعر الجيد