The All New Advanced Car OBD2 Scanner Diagnostic Tool
The Exctool ET331 is the all-new upgrade from basic OBD II code readers in all aspects. Not only can this full OBD2 mode OBD2 diagnostic tool read diagnostic fault codes and freeze frame data, it can also retrieve live engine parameters, O2 sensor test/ on-board monitor test results and do an EVAP test to better help you diagnose car issues. It‘s plug and play: plug into your vehicle’s 16-pin OBDII DLC and you are ready to go. It has a huge DTC library and will be a very useful and reliable auto accessory which offers comprehensive vehicle information for rapid, accurate diagnosis and repair.
Live Data
Retrieve real-time data or status from various sensors and components in the engine ECU, such as engine RPM, coolant temperature, oxygen sensor readings, massive air flow, fuel trim, fuel pressure and more.
Mode 05
It provides access to the engine control module oxygen sensor monitor test results. Not available on vehicles with Controller Area Network (CAN) system. Go to Mode 6 for these cars.
Mode 06
On-board monitor tests: allows access to the test results for on-board diagnostic monitoring tests of specific components that are both continuously monitored (e.g. misfire monitoring) and non-continuously monitored (e.g. catalyst system).
EVAP Test
It allows you to Initiate a leak test for the vehicle’s EVAP (Evaporative Emission Control System) to check the integrity and functionality of the system that captures and stores fuel vapors.
Make Car Diagnostics Easy
Save Time & MoneyPerform a quick diagnosis of your car anywhere when you have a check engine light on the dashboard. It enables you to read the fault codes, find out what the problem could be and perhaps fix it yourself, or give you a peace of mind in case you need to see a mechanic.
Fast & ReliableThanks to built-in high performance MCU and increased DTC database, you can get accurate diagnostic results in seconds.
Review & PrintYou can print out the diagnostic data and send the data to your mechanic for help.
Compatible with cars and light trucks since the following model year USA – 1996 Canada – 1998 European Union & UK: 2001 (gas), 2004 (diesel) Australia: 2006 (gas), 2007 (diesel) Mexico – 2006 Japan – 2002Extra Features
Retrieve the vehicle information, like such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number)
Check if the emission-related systems are operating properly to know if your vehicle is ready for a smog check.
Quickly read the 12V car battery voltage to check the battery status.
The scanner has anti-slip protective cover and can easily fit in your palm of hand. Plus menu-driven navigation, hotkeys and 2.8” color screen, all make it extremely easy to use.
Product Specifications
Supported OBD II Protocols KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network) Working Current 48-72mA Working Voltage 12-16V Operating Temperature -4°F~149°F / – 20 ~ 65 ° C Product Dimensions 155 x 87 x 24mm / 6.1 x 3.4 x 0.9 inches Supported Languages English, German, French, Spanish, Italian, Portuguese, Dutch, Japanese, Simplified Chinese, Russian Screen 2.8” TFT color displayCommon Q&A:
1. What vehicles is it compatible?
Cars and Light trucks made since: USA – 1996, Canada – 1998, European Union – 2001 (gas), 2004 (diesel), Australia – 2006 (gas), 2007 (diesel), Mexico – 2006, etc. (OBD II, EOBD or JOBD Compliant )
2. Does it work with electric or plug-in hybrid vehicles?
No.
3. Does it read error codes in non-OBDII systems like ABS, airbag or tpms?
No, it only read check engine light or MIL codes (emission-related).
4. Can it reset oil light, or perform other service reset functions?
No.
5. What live data can be read by this diagnostic tool?
Readable parameters depend on what’s installed on the OBDII system by the manufacturer. It usually includes engine coolant temperature, long & short term fuel trim, mass air flow rate, fuel rail pressure, oxygen sensors, etc.
ENGINE DIAGNOSTIC: this OBD2 scanner diagnostic tool enables you to quickly check your car when the check engine light (CEL, MIL or SES) turns on: read generic and manufacturer-specific error codes (DTCs) with the definitions and other diagnostic data. You can then fix simple problems yourself or take the car to a mechanic in confidence.
FULL OBD-II FUNCTIONS: with support for full 10 OBDII modes, you can get more diagnostic data to help you identify the problems: get freeze frame data and real-time sensor data (e.g. engine coolant temperature, short/long fuel trim, fuel pressure, Intake air temperature, Mass air flow rate); perform an EVAP test; retrieve O2 sensor & on-board monitor test results.
UNIVERAL VEHICLE COMPATIBILITY: Compatible with all-brand vehicles that are OBD2 / EOBD compliant (cars and light trucks model year since year 1996 in the US, 1998 in Canada, 2001 gas & 2004 diesel in UK & EU, etc.). It provides accurate and fast diagnosis for worldwide car owners. Supports all OBD II protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN.
MORE VERSATILE & PRATICAL: features a built-in DTC database with more than 35,000 DTCs (compared to normal 3000+ DTCs in basic OBD2 readers), 10 language options, and three LED indicator lights for DTC and connection status. It can even read 12V car battery voltage so you can quickly know the current battery status.
EASY TO USE & CARRY: plug & play, powered by OBD II port directly, portable design with anti-slip protective sleeve; 2.8’’ clear color display for easy viewing. Supports DTCs & live data review & print, and free update via Windows PC. Comes with 1-year Replacement Warranty against defect.
NOTE: Does not work with hybrid or electric vehicles. Does not read or reset non-OBD II systems like ABS, airbag, TPMS, oil service, etc. Cannot do service reset.
Ethan chesnut –
Great product
Very good quality works great!
Jamal McLaughlin –
Useful
Very useful for diagnosing codes.
Antonio Rosario –
Tools
Great tool
Rich Schelling –
Cost savings!
The scanner did exactly what it was supposed to do at a reasonable cost. I’m pleased with it. The savings over paying a shop to tell me a problem and I doing the repair myself.
sharon barnes –
For home mechanic.
Good quality more than enough for the person who works on their own cars.
ThomasL.Doyle –
Price is right.
Worth the money and it is a good quality item.
dj brown –
does everything you need
great item
Light6060 –
Bad product
I’ve used this thing three times on my Honda Accord when the engine check light is on and I try and read codes. It shows no codes even though the engine check light is on and it is clicked off and froze where it wouldn’t change screens I would not buy this scanner
Jacqueline Walker. –
Not decided if it will fit in my 2003 BMW 5 series. A big lack of instructions as to how to use it. If it fits my car I don’t know. Will give it a try. Previous ones have been a small chip that plugs into my odb port and works over my phoneWhen I’ve worked out how to plug it in I’ll change this review.
Amazon Customer –
Used so far on a Smart Car, and found to be very effective. Fairly easy to update for new cars. I thought it was good value. But remember, its designed for basic diagnostics.
Abidemi Norbert –
Works well on 2011 Mercedes 300ML
william steven mcmeekin –
Looks ok , fast delivery but not used it yet
Mrs Knott –
Very impressed with this item