[Built-in 15+ Powerful Functions]: Compared to entry-level diagnostic tools, the AD200 not only has all of their functions, but it is also more professional and powerful. This vehicle code reader supports: read/clear code, I/M readiness, EVAP/o2 sensor test, freeze frame, real-time data stream curve and more. with those function, you can quickly check the cause of the engine check light (MIL), and reset it, but also can accurately read the dtc code and clear it, let your car back to health
[Enhanced OBD2 Scanner Diagnostic Tool]: This obd scanner has been greatly enhanced in terms of data reading, Can read up to 50 data (battery voltage, coolant temp, engine RPM, load value, air flow rate, oil temp, fuel rail pressure, transmision gear status…) It can provide you with extremely detailed data stream, so that you can diagnose vehicle faults more accurately. It also supports recording fault data for review and printing fault data which can send it to professionals for analysis
[Show Detailed Data & Retrieve vehicle VIN]: AD200 car diagnostic tool not only diagnoses the engine system and show detailed data, but also convert boring data into real-time visual curve, which can greatly help you intuitively observe the abnormal fluctuations of the data, and narrow down your check, saving you a lot of time and maintenance cost. This auto fault code scanner also has a built-in “one-click get vehicle information” practical function, which can quickly retrieve VIN/CID/CVN
[Bigger Screen & Efficient Hotkeys]: AD200 has a 2.4 inches (262k) true color display to show the UI more clearly. Different from other basic diagnostic tool, AD200 has more button, make daily operation more convenient. This scanner also adds two hotkeys: I/M – quick start I/M test, faster know engine system current situation and whether can pass sm-og test, the Help – press this key to get tip (about OBO or datastream or I/M readiness explanation/printing help), let you know the scanner quickly
[Warning Light & Support Print]: There are three warning lights (green, yellow, red). After the diagnosis of the system, it will tell you the seriousness of the vehicle fault, in which the green means that your vehicle is very healthy, the yellow means that your car is a little abnormal, but it does not affect the driving, the red means that your car has a serious fault. this code readers scan tools scan tools support generate or print diagnostic report, so that you can provide it to technician
[Wide Fitment & OBD Protocols]: This car diagnostic scanner is widely fit for various models, such as: 1996-2024 north america cars, 2000-2024 europe cars, 2008-2024 asia cars (such as japan or Korea brands), but also includes 12V truck, SUV, MPV, sedan, etc. even if you have multiple cars of different brands or year, it can easily adapt. Supported OBD protocols: KWP2000, 15765-4 CAN, ISO9141-2, J1850 VPW, SAE J1850 PWM, are easily fit ford, chevy, GM, Toyota, Honda, dodge and other vehicles
[Excellent Configuration]: The fixd car diagnostic tool has a 3.9-foot-long cable that allows you to operate it in narrow environment. The engine code reader has an advanced ARM cpu that is 3X as fast as the entry level scanner. The body shell is made of strong plastic, which will not be damaged if accidentally dropped to the ground, while ensuring the normal operation of the diagnostic tool.The appearance and buttons are all humanized, and the grip and operation are very comfortable
DANAE C. –
Impressive Features and Easy to Use
Worked flawlessly on my Mercedes AMG. Clear diagnostics, simple interface, and accurate results. Having peace of mind before going to a repair shop is priceless.For the price, this scanner offers exceptional value and priceless peace of mind.
Akbar Salahuddin –
The AD100 Universal OBD2 Scanner is impressive!
This AD100 Universal OBD2 Scanner was easy to use and understand, with clear instructions in the manual. I enjoyed learning and using it. It accurately identified my engine problem and cleared the engine light after repairs. The connectivity was reliable and worked perfectly. This AD100 Universal OBD2 Scanner is a great value for my tool chest and provides excellent value for money.
Rusty Spur –
Easy to use and well worth the money
This is the first scanner I’ve ever had so I have no previous experience to compare to. But this little gem has already saved me hundreds of dollars. My car shuddered once when I started it and the check engine light came on and stayed on. It’s a Prius and where I live in Montana, only the dealer works on them. So my only option was to take it to the dealer for diagnostics, which cost hundreds of dollars and then make a second appointment to actually fix whatever the problem was. With the scanner, I was able to get a code, look it up on the Internet to see what all the possible causes were which could have been coils or some other things. And the dealer may have told me they needed to replace coils and I wouldn’t know any different. But one of the simplest things to try was to add some HEET to the gas tank and clear the code and see if the code came back. It didn’t and the car runs fine.
Kimberly –
Works great though no clear instructions
There are really no clear instructions on how to use, just start pressing the buttons and it becomes pretty obvious. I have a 2001 Range Rover that now and then the check engine light comes on. I usually go to the Land Rover mechanic ($$$$) only to find out the check engine light came on for something simple, such as the gas tank cap not screwed on tight enough. The check engine light came on again, so I decided to save myself some $$$$ and half a day of going to the mechanic to see what the issue was. It coded P1117 (coolant sensor), so I took my Rover to the mechanic, and sure enough, that was the issue! I was able to clear the code on my own, though I won’t do so in the future if it is coding something important (which most the time it is, but old Rovers like to be silly over the smallest of things).
Anthony J Martinetti III –
Best for the money
Extremely easy to use very clear cut and right to the point on all analysis. One of the easiest and best OBD2 readers to use at a very reasonable price.
Daniel Galbraith –
Item exactly as described.
Works perfect.
Kammie W. –
Very Handy
This little gadget saved me $$$ at the shop. It was easy to connect, very readable codes, and can clear codes as well. It identified a faulty MAF sensor. I found a compatible replacement here on Amazon and switched it out myself in minutes. It’s already paid for itself and I highly recommend purchasing one.
Ikarus S. –
Pig with lipstick, and it ain’t Kosher
I didn’t knew in the past years, those readers dropped in price. Yes, this gadget seems to be great, having many functions and is being built well. Don’t take me wrong, it does read codes (maybe, not the reason I got it), it does track live data, it has some other nifty features I didn’t explore, but the sole reason I’ve opted for the more expensive model (the one with the “print” function) and the fact that it doesn’t work, and I’ve been gaslit by the company, led me and my money towards something that’s actually worth its price. The manual was a waste of tree, pretty much plug in and work it. I didn’t needed a dead tree to tell me basic functions that didn’t go in depth. The company is keeping the software to extract the data a better secret than NSA crypto standards. It’s impossible to get an answer, even if you provide them serial numbers and proof of purchase. You have to buy it from their website to qualify for help. It plugs in the computer, it finds it (with the standard drivers), but then…..how to get the data off the tool to put it in a data file? That’s the golden question, and after unearthing the internet for the past 2 weeks, I must admit defeat. I even tried to transfer the data manually via the review function, but after today, when I’ve spent 4+ hours logging data in a spreadsheet for approx 2 hrs of drive time, I must admit that I don’t have this time to waste. Going through the print function of the tool, it does something (or at least states that) then beeps, nothing…..You pay what you get for, but I ain’t paying it. I want my refund. If you do want to get this, get the cheaper one, the other one just don’t work, and if, they won’t tell you how.
Carole houle –
super et fonctionne très bien
Richard B –
Works great so far!
Gus Friesen –
Have used it for 3 months now and works perfectly to view and clear codes, and read real time data. Amazing for what I paid.
Bernard Rocheleau –
Bonjour,devrait résoudre le problème de capteur de Ford.il faut reparamétrer le véhicule par rapport aux capteurs (jeune ou vieux).Valide aussi, si il y a d’autres problèmes avec le véhicule.Merci.
Gary Corbett –
Worked well first time I