From the brand
Power Tool Organizer
Overhead Garage Storage Rack
【3-Tubes Reinforced Upgrade Design】 This heavy-duty power tool rack supports up to 600 lbs. Its innovative cross-support design with 3 tubes delivers double the strength and stability for storing power tools.
【Store 50+ Kinds of Tools】Maximize your wall space with a system designed to store 50+ tools. It includes 12 anti-roll drill holders, 6 side hooks for pliers and wrenches, and tiered shelves for heavy tools—all organized and within reach.
【Quick Assembly】Our wall mount includes all hardware, a clear manual, and a video guide. Its intuitive design ensures straightforward installation for everyone, from beginners to experts.
【Versatile Wall Compatibility】This versatile wall-mount organizer installs easily on wood, pegboard, concrete, or tile. It’s the ultimate space-saving solution for your garage, workshop, or shed.
【The Gift for Dad】 Perfect as a thoughtful dad gifts. This heavy-duty tool organizer offers safe carrying handles and scratch-proof corners for any dad or DIYer—keeping their garage secure, orderly, and ready for work.
【100% Satisfaction Guarantee】Your satisfaction is our priority! Jusgym power tool organizer come with 24/7 customer service and a 1-year limited warranty. If any part fails, contact us for instant replacements—guaranteed!
Alex –
Great value.
Better than expected.I thought it was going to be too small even after putting it together, but once mounted and with my tools on, it is quite sufficient for my needs.I’m more excited about being able to hang my wrenches on the side and not having my power tools tucked in a drawer.The welds are small, but not sloppy. There is a slight slope upwards to keep the power tools and screwdrivers in place. Very happy with the quality and the assembly process.I would suggest mounting it to a stud or metal like I did.
BaKaCa –
Sturdy and easy to use I
I love that tools are better organized and the chargers are not longer getting lost. Best organizer we own.
Bob –
Very sturdy, a little trouble with spacing
Only problem was each shelf section was 16 in wide. The piece that that mounted to the wall was 1/4 in wide and goes between the shelves. So 1st section was 16 1/4 wide, second section was at 32 1/2. Still doable i just had to start on the edge of the 2×4.
April C –
Finally organized my tools in one place.
Looks sturdy and spacious. We’ll put together.
Duncan Schleiss –
Easy to assemble and install. Works as advertised.
It does the job. Very satisfied.
barry –
Flexible
Works great and great quality
David Younker –
Holds so much in a small spot
Worked out excellent. Major space saver
caliberbob –
Love this, wish there was a taller version
No complaints at all. Ver easy to put together. My biggest issue was my big dumb fingers trying to thread on the nuts to the bolts. Mounts easily. Really the top four screws are the most important. Once you get those, I personally just buy the bottom corner screws in. Way faster and those two screws keep it square. Glad I got this!
Amazon Customer –
Have bought 3 more since the first purchase.
Eric B –
Assembly was straightforward and uneventful. I used a driver set to minimum torque, but you could just as easily assemble it by hand using the included tool it’s fine, just slower. Once assembled, the rack feels solid and well put together.The material appears to be powder-coated steel. It doesn’t feel cheap or flimsy, and once everything is tightened up, the structure is quite rigid. There are three sets of hooks / hole options per side, which gives some flexibility depending on the tools you want to hang.Wall mounting is where you need to pause and think a bit. The mounting holes are spaced at 15 3/8 inches, which is… an interesting choice. It’s close enough to the standard 16″ stud spacing that you might catch studs if you’re lucky, but it’s not guaranteed. The kit includes four drywall anchors, but there are a couple of considerations here:Many garages are built with double drywall for fire code reasons (about 1 1/4″ total thickness), which is too thick for most standard drywall anchors to expand properly, including these.Personally, I don’t trust drywall anchors of any kind for load-bearing applications.In my case, the bottom two screws lined up with a stud or furring strip, and I added a piece of 3/4″ plywood backing to distribute the load. It probably wasn’t strictly necessary, but it made the installation feel much more safe.Once mounted, I started loading it up. It holds most DeWalt (and similar) cordless tools comfortably. The side hooks work well depending on the tool shape. The top shelf doesn’t quite fit my DeWalt circular saw as-is; I may eventually cut one of the wires so it can sit flat. The perforated side plate work well for screwdrivers.Shelf spacing is fairly tight, about 5 1/4 inches between shelves, so you can’t store bulky items, but it’s still very usable for batteries, chargers, and smaller tools. Even fully loaded, the rack remains solid and doesn’t feel flimsy or wobbly.Overall, this is a well-built and practical power tool organizer. Just plan your wall mounting carefully, ideally into studs or with proper backing, and it becomes a very solid and useful addition to a garage or workshop.5/5, it does what it’s supposed to do, it’s well built, and should last a long time.
C. T. –
I ordered this rack for storage of my Dewalt power tools and accessories when I am working at an off grid cabin. I would rather have my tools accessible when working rather than digging through a tool box or bag, and this rack meets all of my needs.It is sturdy, made with heavy gauge metal, and is nicely finished to prevent scratches and rust. The wire shelves are sturdy and there is no wobble in the rack when all is tightened up.There are a couple of minor aggravations – the first being that the holes on the vertical supports are 15 1/2 ” and not 16″. I would rather sink the hanging screws into the centre of the stud and not on the edges, especially with the weight that will end up on the rack. I will be nailing two 2×4 boards across the vertical studs and attaching the rack to these boards.I had one hole that was not drilled out preventing me from threading the screw through it. The good news is that when I pressed the drill bit in where the hole needed to be drilled, the pressure caused the metal to pop out revealing the oblong hole.It’s nice that they provided the tools to build the rack, but save yourself a headache and use a 10mm socket and appropriate sized Allen key to assemble it.
Daniel –
Based on the product information, here’s a positive review for the Jusgym Power Tool Organizer:Excellent Garage Storage Solution – Transformed My Workshop!⭐⭐⭐⭐⭐I recently installed this Jusgym power tool organizer in my garage and it’s completely transformed my workspace! For under $30, this is an outstanding value that has solved my tool storage chaos.The build quality is impressive. The heavy-duty alloy steel construction with powder coating feels substantial and robust. The innovative 3-tube cross-support design provides exceptional stability – I can confidently load this with my heaviest tools without any wobbling or sagging. The 200-lb weight capacity is no exaggeration; this rack handles my entire cordless tool collection plus hand tools with ease.The 4-tier design maximizes vertical wall space brilliantly. I can now store 30+ tools in an organized, accessible manner. The 8 drill holders (with anti-roll design) keep my cordless drills, impact drivers, and other power tools perfectly positioned and easy to grab. The 6 side hooks are ideal for pliers, wrenches, and other frequently-used hand tools. The tiered shelves accommodate my larger, heavier tools like circular saws and angle grinders without issue.Installation was genuinely straightforward – the “15-minute quick assembly” claim is accurate. All mounting hardware was included, and the instructions were clear and easy to follow. The included video guide was a helpful reference. I mounted mine on drywall with the provided anchors, and it’s rock-solid. The versatility to mount on wood, pegboard, concrete, or tile means this will work in virtually any garage or workshop setup.The scratch-resistant corners and overall finish protect both the rack and my tools. Everything is powder-coated, which should prevent rust and ensure longevity even in my occasionally damp garage environment.What I love most is how this has decluttered my workspace. Instead of digging through drawers or searching for misplaced tools, everything is now visible, organized, and within arm’s reach. My workflow has improved significantly – I can quickly identify what I need and grab it without interrupting my projects.At this price point, you’re getting professional-grade garage organization that rivals systems costing twice as much. The 1-year warranty and 24/7 customer service provide additional peace of mind. This would make an excellent Christmas or Father’s Day gift for any DIYer or professional who values an organized, efficient workspace.Highly recommend for anyone looking to upgrade their garage or workshop organization. This is one of the best tool purchases I’ve made!
RyanJ –
Solid as a rock power tool organizer! This thing can handle all the tools you can throw at it. Mount it to a stud in your garage or in your shed and you’ve got an instant storage organizer.It isn’t overly difficult to install or setup. It holds several drills and other tools. It has 4 tiers of space for you to place things like drill bit boxes, and other tools that just don’t fit on the other spots.It says it can hold 200lbs and I am inclined to believe every bit of that when you get this mounted it just feels very sturdy and can hold up to a lot of abuse.I put one in my garage and I put one in my shed because they are so versatile for even yard tools and other things of this nature. Don’t hesitate to pick one up as the value is great and you can’t find something close to this in a hardware store!